Pelco DX8100 Bedienungsanleitung PDF herunterladen (Seite 99)

C2631M-C (7/09) 99

7. Do the following:

a. In the Device panel, click the check box of the desired export device.

b. Click the check box for each time range you want to export.

8. Click Export.

Figure 65. Selecting the Export Device and Time Ranges

INSERTING AND REMOVING A USB FLASH DRIVE

The DX8100 supports both USB 1.1 and USB 2.0 flash drives. To ensure data is not lost or corrupted when exporting data to a USB flash drive,

follow the steps listed in Removing a USB Flash Drive on page 99.

This section describes how to insert and remove a USB device and includes the following topics:

• Installing a USB Flash Drive on page 99

• Removing a USB Flash Drive on page 99

INSTALLING A USB FLASH DRIVE

This section describes how to install a USB flash drive. To install a USB flash drive into the computer:

1. Insert the USB drive into the computer’s USB 2.0 port.

2. Wait five seconds while the computer recognizes and automatically installs the device.

REMOVING A USB FLASH DRIVE

You can remove a USB device within the DX8100 environment. In this case, you do not have to exit to the Windows environment.

To remove the USB flash drive from the computer, follow the Windows instructions applicable for your machine. For example, for Windows XP:

1. Click the Safely Remove Hardware icon in the task bar. The system displays a message to safely remove the USB device.

2. Click the Safely remove USB Mass Storage Device, Drive (G:) box. The system displays a confirmation message.

3. Remove the USB flash drive.

WARNING: Improperly removing a USB drive can cause data to be lost or corrupted.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 250 251

Keine Kommentare

Pelco DX8100 Bedienungsanleitung Seite 99