Pelco DX8100 Bedienungsanleitung PDF herunterladen (Seite 19)

C2631M-C (7/09) 19

Logging On to the Client Application

The default password for the DX8100 Client application is “000000.” You should change the client password immediately after logging on to the

software for the first time. Follow the instructions below to change the DX8100 Client application login password. For information about

automatically connecting to a remote, refer Automatically Connecting to a Remote Site on page 25.

To log in to the DX8100 Client:

1. Start the DXDX8100 Client application. The DX8100 Client Password dialog box opens.

2. Enter a valid password in the “Input password” box.

3. Click OK. The DX8100 Client application starts.

Pelco recommends that you change the DX8100 Client application default password after you first log in to the DX8100 Client application.

For information about changing the default password, refer to Changing the DX8100 Client Application Login Password.

CHANGING THE DX8100 CLIENT APPLICATION LOGIN PASSWORD

To change the DX8100 Client password:

1. Wait while the software loads and the DX8100 Client application window opens.

2. From the DX8100 menu bar, choose File > Client Password. The DX8100 Client Password Setup dialog box opens.

3. Enter the old password in the “Old password” box.

4. Enter a new password in the “New password” box.

5. Re-enter the new password in the “Confirm” box.

6. Click OK.

Remember the new client password or write it down and store it in a secure location.

ENABLING DIRECTDRAW VIDEO HARDWARE ACCELERATION

If your computer’s video hardware supports Microsoft

DirectDraw

extensions, you can enable DirectDraw to enhance video performance.

Enabling DirectDraw improves performance by delegating graphics acceleration duties to your computer’s video hardware instead of your

computer’s main processor.

To enable DirectDraw hardware acceleration:

• Select View > DirectX Draw.

WARNING: Do not enable DirectDraw on the Client application unless you are certain that your hardware supports DirectDraw hardware

acceleration. Check the documentation that came with your computer and your graphics card before enabling DirectDraw. Although some

VGA cards support DirectDraw, not all are compatible with the DX8100 Client application. Check the Pelco Web site for a complete list of

compatible VGA cards.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 250 251

Keine Kommentare

Pelco DX8100 Bedienungsanleitung Seite 19