Pelco DX8100 Bedienungsanleitung PDF herunterladen (Seite 57)

C2631M-C (7/09) 57

PTZ PRESETS

A preset is a user-defined camera position using PTZ and focus commands the (camera’s auto focus option must be turned off). Only cameras that

support positioning and programming using D, P, Coaxitron, or supported third-party protocols can use this feature. The DX8100 Series HVR can

address up to 150 PTZ presets (1-150). Preset 95 is reserved for remote camera setup, and preset 99 is reserved for camera autoscan mode.

From the DX8100 menu bar, choose View > Extended View.The following PTZ operating guidelines must be observed:

• To program or clear presets, preset tours, and patterns, the button must be engaged.

• To activate presets, tours, and patterns, the button must be disengaged.

This section describes how to program, activate, and clear presets and includes the following topics:

• Programming a Preset

• Activating a Preset on page 58

• Clearing a Preset on page 59

PROGRAMMING A PRESET

This section describes how to program a preset. The following PTZ operating guidelines apply:

• Clicking the button places DX8100 in PTZ programming mode.

• While in PTZ programming mode, multiple presets can be programmed until the button is pressed again.

To program a PTZ preset:

1. On the DX8100 toolbar, click the Live button .

2. Drag a camera from the Site Tree onto a view panel.

3. On the PTZ keypad, click the Set button .

4. Using the on-screen PTZ controls and PTZ keypad, move the camera to the desired position and adjust the zoom setting.

Figure 23. Creating a Preset

EXIT

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 250 251

Keine Kommentare

Pelco DX8100 Bedienungsanleitung Seite 57