Pelco DX8100 Bedienungsanleitung PDF herunterladen (Seite 133)

C2631M-C (7/09) 133

5. Click Apply.

Figure 105. Event-Relay Link Settings: Video-Loss Link Settings Section

Linking Cameras to Record in Response to Alarm Events

To link multiple cameras to record in response to a single alarm input:

1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2. Click the Linking . The Linking page is displayed.

3. Click the Event-Recording Link Settings tab.

4. In the Alarm Record Link Settings section, do the following:

a. Select an Alarm channel from the Alarm Channel drop-down box.

b. Click the button for each camera you want to begin recording when the source alarm is triggered.

5. Click Apply.

Figure 106. Event-Recording Link Settings: Alarm Record Link Settings Section

Linking Cameras to Record in Response to ATM/POS Events

To link multiple cameras to record in response to an ATM/POS event:

1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2. Click the Linking button . The Linking page is displayed.

3. Click the Event-Recording Link Settings tab.

4. In the ATM/POS Record Link Settings section, do the following:

a. Select an ATM/POS address from the ATM/POS address drop-down box.

b. Click the button for each camera you want to begin recording in response to an ATM/POS event.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 250 251

Keine Kommentare

Pelco DX8100 Bedienungsanleitung Seite 133