Pelco DX8000 Bedienungsanleitung PDF herunterladen (Seite 155)

C626M-B (3/05) 155DX8000 PC Client Application

EMERGENCY E-MAIL NOTIFICATION SETUP

The DX8000 can be conﬁgured to send e-mail notiﬁcations alerting users of motion and alarm events. Users with Power User access and higher

can conﬁgure e-mail notiﬁcation. Notiﬁcations can be sent to a single e-mail address or a group of addresses either immediately after an event

occurs or periodically according to a predeﬁned schedule. You can conﬁgure up to 32 e-mail groups. Up to 32 members can be assigned to each

e-mail group.

Before sending notiﬁcations, you must provide information about your e-mail server and establish what events, motion and/or alarm, you want to

include in the e-mail message. Timing and frequency of the e-mail notiﬁcations must also be set. You should test the e-mail notiﬁcation function

immediately after conﬁguration to ensure your system is set up correctly.

ACCESSING THE EMERGENCY E-MAIL NOTIFICATION SETUP

To access the emergency e-mail notiﬁcation setup:

1. Click .

2. Click .

3. Click the Emergency E-mail Notiﬁcation Setup tab.

Figure 197. E-Mail Notiﬁcation Setup

IMPORTANT: To use emergency e-mail notiﬁcation, the DX8000 Series DVR must be connected to a local area network (LAN) that main-

tains an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail

accounts to which you want to send notiﬁcations. Consult your network administrator for information on conﬁguring e-mail notiﬁcation on

your local network.



1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 235 236

Keine Kommentare

Pelco DX8000 Bedienungsanleitung Seite 155