Pelco DX8000 Bedienungsanleitung PDF herunterladen (Seite 231)

C626M-B (3/05) 231DX8000 Web Client

PTZ PATTERNS

A pattern is a user-deﬁned, viewable camera path with a deﬁnite beginning and end. Patterns are made up of a sequence of standard pan, tilt,

and lens commands. Patterns are stored in the internal memory of the PTZ device, such as a Spectra dome, that is connected to the DX8000.

Depending on the type and conﬁguration of the PTZ device, the DX8000 can address up to four unique PTZ patterns. Once deﬁned, a pattern can

be activated with a series of on-screen commands. A pattern will run continuously until it is deactivated.

PROGRAMMING A PATTERN

To program a pattern:

1. Drag a camera from the site tree onto a view panel.

2. Click to enter programming mode.

3. Using the PTZ keypad, select a number for the pattern (1 to 4).

4. Click .

5. Move the camera through a series of movements using the on-screen pan and tilt, zoom, and focus controls.

Figure 308. Programming a Pattern Using Web Client

To stop programming a pattern:

1. Click .

2. Click .

NOTE: Only PTZ-enabled cameras that support pattern programming through D, P, or Coaxitron protocols can use this feature.

NOTE: Certain PTZ devices, like Pelco’s Spectra series domes, will display an on-screen message stating the amount of remaining memory

available for pattern programming.







1 2 ... 226 227 228 229 230 231 232 233 234 235 236

Keine Kommentare

Pelco DX8000 Bedienungsanleitung Seite 231