Pelco DX8000 Bedienungsanleitung PDF herunterladen (Seite 126)

126 C626M-B (3/05)DX8000 PC Client Application

Conﬁguring Advanced Frame Rate

Both resolution and frame rate settings can be adjusted in Advanced Frame Rate Conﬁguration mode.

To set recording resolution and frame rates for each channel:

1. Click Advanced to access the advanced frame rate conﬁguration controls.

Figure 159. Accessing Advanced Mode

2. Select the radio button of the recording mode you want to conﬁgure. Options are

• Normal

• Motion

• Alarm

3. Select resolution values for individual channels from the drop-down boxes. Refer to Table F.

Table F. Resolution Values

4. Using the Maximum Frame Rate Settings sliders, set the maximum frame rate for each resolution.

5. To set a global frame rate for all channels of a particular resolution type, move the slider under Global Frame Rate Settings. Select a frame

rate from 1 to 30 ips according to the available capacity for that resolution.

6. To set the frame rate for individual channels, use the sliders in the top portion of the screen. Select a frame rate from 1 to 30 ips according

to the available capacity for that channel.

NTSC PAL

320 x 240 352 x 288

640 x 240 704 x 288

640 x 480 704 x 576

720 x 240 720 x 288

720 x 480 720 x 576

NOTE: Setting a resolution value for one recording mode sets the resolution value for all modes. For example, setting resolution to

640 x 480 in Motion recording mode will change the resolution to 640 x 480 in Normal and Alarm recording modes as well.

NOTE: Setting the maximum frame rate for a resolution will impose a limit on how high frame rates can be set on individual channels

using that resolution. In certain cases, setting a lower maximum frame rate for a particular resolution may free up resources to be used by

channels set at another resolution. In any case, frame rates cannot be set for any channel or resolution beyond the availability calculated by

the DX8000.



1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 235 236

Keine Kommentare

Pelco DX8000 Bedienungsanleitung Seite 126