Pelco C2403M-C Bedienungsanleitung

ADDENDUMPelco Worldwide Headquarters3500 Pelco Way • Clovis, California 93612 USAUSA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150International

C2496M (10/05) 9 ATTACH BASE Release the base locking ring for access to the mounting holes. To attach the base to an adapter plate or conduit adapte

10 C2496M (10/05) Adjustments (Color Camera Only) If you have a color camera, it is set up at the factory and normally requires no adjustments. Somet

C2496M (10/05) 11 SWITCH SETTINGS FOR VARIFOCAL LENS The high resolution camera with varifocal lens and auto iris is configured at the factory for opt

12 C2496M (10/05) SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS Refer to the switch drawing. The switch is located next to the lens. Aut

C2496M (10/05) 13 FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS To adjust the focus, it may be necessary to remove the heater board in

14 C2496M (10/05) Specifications General Pan/Tilt Adjustment Manual; 180° pan; 180° tiltConstruction Aluminum base and cover, steel camera mounting b

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workma

Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:

INSTALLATIONC2496M (10/05)310 Series Camclosure®Integrated Camera System

C2496M (10/05) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 C2496M (10/05) Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.

C2496M (10/05) 5 REGULATORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thi

6 C2496M (10/05) Description The 310 Series Camclosure ® integrated camera system is a track-light design that mounts to a wall or ceiling. The syst

C2496M (10/05) 7 • Mounting to ICS310-COND conduit adapter (not supplied) • Mounting to a two-gang electrical boxCONDUIT ADAPTERWALL ORCEILINGTWO-GAN

8 C2496M (10/05) CONNECT VIDEO AND POWER 1. Some indoor installations do not require a heater. If the installation does not require a heater, disconn