Digital Video RecorderDX8100 DX8100-EXPExpansion UnitInstallation Manual C2636M-B (4/07)
10 C2636M-B (4/07) Install the DX8100 I/O Card The DX8100 I/O card comes in a separate box that contains the DX8100 I/O card and two cables: a 5-pin
C2636M-B (4/07) 11 To install the DX8100 I/O card in slot 7:1. Remove the Rear Cross Brace. Refer to item 14 in Figure 7 on page 9.2. Do the followin
12 C2636M-B (4/07) Installing the Capture Card This section describes how to install the DX8100 Capture Card. The Capture Card installation is perfor
C2636M-B (4/07) 13 To install the optional Capture Card:1. On the main Capture Card, remove the 7-wire TV/Audio cable and lay the cable over the DX81
14 C2636M-B (4/07) Reassemble the Unit To reassemble the DX8100:1. Replace the chassis cover using the same screws you removed from the side and rea
C2636M-B (4/07) 15 Connecting the Expansion Unit to the DX8100 This section describes how to connect the Expansion Unit to the DX8100. The Expansion
16 C2636M-B (4/07) To connect the Expansion Unit to the DX8100 DVR: 1. Do one of the following: • Desktop mounting: Set the Expansion to the side or
C2636M-B (4/07) 17 4. Power on the DX8100. Figure 16. Restarting the Unit 5. Log in to the DX8100 and verify that the additional devices are displa
18 C2636M-B (4/07) REVISION HISTORYManual # Date CommentsC2636M 11/06 Original version.C2636M-A 3/07 Added Expansion Unit rack mount dimensions and
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective inmaterial or workman
Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:
C2636M-B (4/07) 3 Introduction Welcome to the DX8100-EXP Expansion Unit upgrade for the DX8100 Series digital video recorder (DVR). This document ser
4 C2636M-B (4/07) Table A describes the additional capacity that the DX8100-EXP Expansion Unit upgrade adds to the base model DX8100. PARTS LIST In
C2636M-B (4/07) 5 TOOLS NEEDED OTHER DX8100 OPTIONAL ACCESSORIES The DX8108 base unit comes with an 8-channel Capture Card and the DX8116 base unit i
6 C2636M-B (4/07) Getting Ready Before you install the DX8100-EXP Expansion Unit, familiarize yourself with the instructions throughout this manual.
C2636M-B (4/07) 7 6. Ensure that the DX8100 Series DVR and all of its components are protected against electrostatic discharge (ESD). Before handling
8 C2636M-B (4/07) Prepare DX8100 for Expansion Unit Installation This section describes how to access the DX8100 interior. For information about mou
C2636M-B (4/07) 9 COMPONENT LAYOUT Figure 7 shows the slots and the DX8100 Series DVR’s major components. Some detail is removed from the illustrati
Kommentare zu diesen Handbüchern