Pelco Switch S66X Bedienungsanleitung PDF herunterladen (Seite 2)

2 PELCO Manual C410M — 9/94

4.0 INSTALLATION

To install the sun shroud, perform the following steps:

1. Unclamp the enclosure lid and remove.

2. Remove the six (6) screws from the enclosure

lid.

3. Align the screw holes in the sun shroud and en-

closure lid.

Note: The sun shroud can be aligned in

either direction and fits over the top of the

enclosure and vent cap(s).

4. Install the screws with the spacers as illustrated

in Figure 1 and tighten.

Figure 1. Sun Shroud Assembly Diagram

1 2 3 4

Keine Kommentare

Pelco Switch S66X Bedienungsanleitung Seite 2