ICS090 Series Camclosure®Housing (Not Upgradeable)®INSTALLATIONC2477M (6/03)
10 C2477M (6/03)SPECIFICATIONSGeneralConstructionBack Box andSurface Mount Ring: ABS plasticBubble: PolycarbonateFinish: WhiteEnvironment: IndoorWeigh
C2477M (6/03) 11WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material or w
World Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax: 1-5
2 C2477M (6/03)CONTENTSSection PageIMPORTANT SAFEGUARDS AND WARNINGS ...
C2477M (6/03) 3IMPORTANT SAFEGUARDS AND WARNINGS1. Installation and servicing should be done only by qualified service personnel and conform to allloc
4 C2477M (6/03)WELCOMEThank you for purchasing Pelco’s ICS090 Series Camclosure® housing for indoor applications. Theunit is easy to install and can b
C2477M (6/03) 5REMOVE THE BUBBLETurn the bubble counterclockwise and lift (refer to Figure 1). Place the bubble on a nonabrasivesurface.Figure 1. How
6 C2477M (6/03)Figure 2. Ceiling/Wall InstallationWALL ORCEILING6-32 TOGGLE BOLTS(NOT SUPPLIED)BACK BOXAND SURFACE MOUNT RINGINSTALLATION TO SURFACE
C2477M (6/03) 7SURFACE MOUNT RING BACK BOXSTANDOFFFigure 5. How to Remove Surface Mount Ring from Back BoxIN-CEILING INSTALLATION – SUSPENDED CEILING
8 C2477M (6/03)IN-CEILING INSTALLATION – FIXED CEILING/WALLRefer to Figure 6 for the following steps.1. Cut a four-inch diameter hole in the ceiling/w
C2477M (6/03) 9REINSTALL THE BUBBLETo install the bubble refer to Figure 7 and do the following:1. Align the standoffs of the bubble with the slots of
Kommentare zu diesen Handbüchern