Pelco C421M-D Bedienungsanleitung PDF herunterladen

C421M-D (4/00)

HT10 Series

Liquid-Cooled Enclosure

IMPORTANT SAFEGUARDS AND WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1. Installation and servicing should only be done by qualified service personnel and conform

to all local codes.

2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P

enclosure, it is designed for indoor use only and it must not be installed where exposed to

rain and moisture.

3. Only use replacement parts recommended by Pelco.

4. After replacement/repair of this unit’s electrical components, conduct a resistance

measurement between line and exposed parts to verify the exposed parts have not been

connected to line circuitry.

5. The installation method and materials should be capable of supporting four times the

weight of the enclosure, pan/tilt, camera and lens combination.

6. Use or mount this enclosure so that it is positioned not less than 91 degrees and not

more than 180 degrees when considering 12 o’clock to be 0 degrees and 6 o’clock to be

180 degrees.

7. Only Nema 3R liquid tight conduit should be used in all outdoor applications.

The product and/or manual may bear the following marks:

This symbol indicates that danger-

ous voltage constituting a risk of

electric shock is present within

this unit.

This symbol indicates that there

are important operating and main-

tenance instructions in the litera-

ture accompanying this unit.

Please thoroughly familiarize yourself with the information in this manual prior to installation

and operation.

DESCRIPTION

The products in the HT10 Series are liquid-cooled enclosures designed for high temperature

applications.

The stainless steel enclosure features two separate double-walled cooling jackets that protect

the camera and lens and other sensing devices housed within the unit.

Models

HT10V High temperature enclosure with Vycor

window; window suitable in

temperatures up to 1300°F (705°C)

HT10V/RC Same as the HT10V except Vycor window has an infrared reflective coating

for environments where high levels of radiant heat are encountered; window

suitable in temperatures up to 1300°F (705°C)

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

3500 Pelco Way,

Clovis, CA 93612-5699

USA

In North America & Canada:

Tel (800) 289-9100

FAX (800) 289-9150

International Customers:

Tel +1 (559) 292-1981

FAX +1 (559) 348-1120

www.pelco.com

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Liquid-Cooled Enclosure

C421M-D (4/00)HT10 SeriesLiquid-Cooled Enclosure®IMPORTANT SAFEGUARDS AND WARNINGSPrior to installation and use of this product, the following WARNING

Seite 2 - 3 Install Camera

IMPORTANT: Check coolantflow rate periodically to ensurethat sediment or deposits arenot restricting flow. This will pre-vent heat from building up i

Seite 3 - SPECIFICATIONS

SPECIFICATIONSMECHANICALCooling Pipe Connections: Standard 3/8-inch NPT pipe fittingsSuggested OperatingPressure: 35 psi, approximately 2.3 gallons/mi

Seite 4 - REVISION HISTORY

REVISION HISTORYManual # Date CommentsC421M 3/91 Original version.C421M-A 3/92 Warranty page added.C421M-B 12/93 New format, dimension drawing; update

Kommentare zu diesen Handbüchern

Keine Kommentare

Pelco C421M-D Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Überwachungskamera-Zubehör Pelco C421M-D herunter. Pelco C421M-D User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern