Pelco C611M-C Bedienungsanleitung

NVR300Network Video Recorder INSTALLATION/OPERATION C611M-C (3/06)

10 C611M-C (3/06) MODELS The NVR300 comprises a series of network video recorders based on the maximum number of supported PelcoNet devices: 16, 32,

C611M-C (3/06) 11 FRONT VIEW Figure 2 illustrates the front view of the NVR300. Figure 2. Front View of NVR300 As illustrated in Figure 2A, note th

12 C611M-C (3/06) REAR VIEW Figure 3 illustrates the rear view of the NVR300. Figure 3. Rear View of NVR300 For detailed information about connecti

C611M-C (3/06) 13 Installation This section provides information about the tasks necessary to install the NVR300. The tasks are as follows: • Invento

14 C611M-C (3/06) HARDWARE INSTALLATION MOUNTING THE NVR300 The NVR300 can be placed on a flat surface such as a desktop or can be mounted into an equ

C611M-C (3/06) 15 Figure 4. NVR300 Rack-Mount InstallationNVR300(4) SCREWS,10-32 X 0.75-INCH, PAN HEAD (2 EACH SIDE) REAR-MOUNTING SUPPORT RAILFRO

16 C611M-C (3/06) INSTALLING HARD DISK DRIVES You must install the data storage hard disk drives supplied with the NVR300 unit. Note that the system

C611M-C (3/06) 17 CONNECTING THE NVR300 TO PERIPHERAL EQUIPMENT Connections of peripheral equipment to the NVR300 are made on the rear panel of the N

18 C611M-C (3/06)Connecting to the NetworkTo connect the NVR300 to the network, refer to Figure 7 and do the following:1. Connect one end of an RJ-45

C611M-C (3/06) 19POWERING ON THE NVR300After the hard disk drives have been installed and the necessary connections have been made to the NVR300, powe

20 C611M-C (3/06)IDENTIFYING THE NVR300 ON THE NETWORKTo identify the NVR300 on the network, do the following: 1. Log in to Windows XP as a user by cl

C611M-C (3/06) 21CONFIGURING TCP/IP SETTINGSTo configure TCP/IP settings, do the following:1. Click the NVR300 Platform Admin icon to call up the NVR30

22 C611M-C (3/06)CONFIGURING ALERTS FOR AN EXTERNAL RAID NVR300NOTE: The following information applies to external NVR300 RAID models only; and not t

C611M-C (3/06) 23Figure 11. Add Server4. Enter the desired name for the NVR300 external RAID machine and the IP address of the NVR300 with the DX9200

24 C611M-C (3/06)Figure 13. Event Notification6. Checkmark the boxes shown in Figure 13.7. Click the E-Mail Setting tab. The E-Mail Setting page appea

C611M-C (3/06) 258. Do the following:• Checkmark the Mail Notify box.• Enter in the Sender Name box the name that will appear as the sender in the e-m

26 C611M-C (3/06)Figure 16. NetSend Setting (Second Page)11. Click the OK button. The Event Notification window will close.Figure 17. ACSGateway Confi

C611M-C (3/06) 27Figure 18. Allow Blocked Content14. Click the ActiveX warning that appears at the top of the window. Then select Allow Blocked Conte

28 C611M-C (3/06)16. Double-click Root, and then double-click the server to display attached RAID units, as shown.Figure 21. RAID Manager (Second Scr

C611M-C (3/06) 29OperationAfter the NVR300 has been installed, connected to the network, and powered up as discussed in the Installation section, the

C611M-C (3/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30 C611M-C (3/06)Figure 23. (Part 1 of 2). NVR300 Web Pages and Associated LinksNVR-STATUS LINKNVR-PLAYBACK LINKA. NVR-PLAYBACK PAGE (REMOTE AVAILAB

C611M-C (3/06) 31Figure 23 (Part 2 of 2). NVR300 Web Pages and Associated LinksNVR-CONFIG LINKNVR-SETUP LINKD. NVR-CONFIG PAGE (REMOTE AVAILABILITY O

32 C611M-C (3/06)START-UP TASKSTo operate the NVR300, start-up tasks include the following:• Accessing the NVR300 user interface • Setting user access

C611M-C (3/06) 33Table C. Client PC System RequirementsBefore beginning the following procedure to access the NVR300 from a client PC, contact your s

34 C611M-C (3/06)To set user access levels and associated passwords, do the following:1. Open the NVR-Config page by clicking the NVR-Config link or the

C611M-C (3/06) 35LOGGING IN TO THE NVR300If you are required to log in to the NVR300, you must enter a user name and password. Before performing the p

36 C611M-C (3/06)OPERATIONAL TASKSWhen operating the NVR300, you can perform various tasks. The tasks that can be performed depend on the user access

C611M-C (3/06) 37Figure 26. NVR-Setup Page—Programmed Recordings Dialog BoxNOTE: Figure 26 shows a Programmed Recordings dialog box that is empty, t

38 C611M-C (3/06)3. Program the configuration parameters. Refer to Table E for configuration guidelines.Table E. Recording Configuration GuidelinesConfig

C611M-C (3/06) 39Table E. Recording Configuration Guidelines (Continued)Configuration Parameter Configuration GuidelinesRecording typeType of recording

4 C611M-C (3/06) Troubleshooting Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40 C611M-C (3/06)Table E. Recording Configuration Guidelines (Continued)Configuration Parameter Configuration GuidelinesEvent recordingAlarm recording o

C611M-C (3/06) 41Table E. Recording Configuration Guidelines (Continued)4. Click the OK button to start the recording based on the programmed paramete

42 C611M-C (3/06)NOTE: If an X appears rather than a camera icon or clock icon, the NVR300 cannot record from that particular recording source. Refer

C611M-C (3/06) 43SCHEDULING A RECORDINGNOTE: Service-level access privileges are required to schedule a recording. When programming a new recording o

44 C611M-C (3/06)To select one or more particular time slots for additional days of the week, repeat steps a and b above.– Select an hourly time slot

C611M-C (3/06) 45SEARCHING FOR A RECORDINGSearching for a recording is performed from the NVR-Playback page remotely using the VMX300 or a client PC.

46 C611M-C (3/06)b. In the “From time” text entry box, enter the desired time in hh:mm:ss military time format (hh = 2-digit hour numbered to 23, mm =

C611M-C (3/06) 47• Stoptime—Displays the date and time the recording ended: – The date is displayed in mm/dd/yyyy format (mm = 2-digit month, dd = 2-d

48 C611M-C (3/06)PLAYING A RECORDINGYou can play a recording remotely using the VMX300 video management system or a client PC on the network. The play

C611M-C (3/06) 49Resizing the Video Display AreaThe video display area displays the video content of the recording that is playing. You can resize the

C611M-C (3/06) 5 List of Illustrations 1 Sample NVR300 Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 C611M-C (3/06)Table F. Playback ControlsIn addition to the playback controls listed above, you can control playback of recordings using the yellow

C611M-C (3/06) 51REPLAYING A RECORDINGWhile a recording is playing, you can replay the recording from the start time in the following ways:• By using

52 C611M-C (3/06)To select multiple recordings for deletion at one time, do the following:1. In the recording selection area of the NVR-Playback page,

C611M-C (3/06) 53NOTE: Once a location is specified, all recordings you wish to save are saved to that location as MPEG files. You do not need to speci

54 C611M-C (3/06)Figure 39. NVR-Playback Controls Used to Take a Snapshot3. If you wish to specify a location to which the snapshot should be saved,

C611M-C (3/06) 55USING THE MPEG VIEWER TO PLAY MPEG FILESTo play recorded video and also audio, if applicable, that was saved as an MPEG file as a resu

56 C611M-C (3/06)• Clicking Open Folder opens the folder to which the MPEGViewer.exe file was saved. The MPEGViewer.exe file is highlighted in the folde

C611M-C (3/06) 57• Time indicators at the beginning and end of the progress indicator bar display the duration of the file in minutes:second format. Th

58 C611M-C (3/06)• Camera icon—Indicates that the recording is active; that is, the NVR300 is currently recording a stream generated by the PelcoNet d

C611M-C (3/06) 59System UpgradeThis section provides information about the following:• Setting the software license to allow the NVR300 to support add

6 C611M-C (3/06) List of Tables A NVR300 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

60 C611M-C (3/06)4. In the Activation Code field, delete the copyright code and then enter the activation code:• If you are upgrading the license, ente

C611M-C (3/06) 61Step 2. Use Windows XP Disk Management to format the newly added storage drive (Disk 1).Using Windows XP Disk Management, format the

62 C611M-C (3/06)ADDING EXTERNAL STORAGE WITH DX9200HDDI VIDEO STORAGE UNITS(For units with no internal storage only.) For expanded storage of NVR300

C611M-C (3/06) 634. If the NVR300 is not already powered on, power on the unit by doing the following: a. On the rear panel of the NVR300, set the pow

64 C611M-C (3/06)d. Click the Next button. e. Confirm selection of Disk 2, and then click the Finish button. Both Disk 1 (NVR300 internal storage s

C611M-C (3/06) 65Step 2. Use Windows XP Disk Management to extend storage volume of the NVR300 by adding disk space from the DX9200HDDI.Using Window

66 C611M-C (3/06)ServiceThis section provides information about the following:• Recovering the system drive if the NVR300 operating system or NVR300 s

C611M-C (3/06) 675. Press the C key to reboot the NVR300.Proceed to Step 2 that follows.STEP 2. PERFORM MISCELLANEOUS TASKS.1. If you are using DX920

68 C611M-C (3/06)REPLACING A DATA STORAGE HARD DISK DRIVE IN A NON-RAID SYSTEM (NVR3xx-500 SYSTEMS ONLY)In NVR316-500 and NVR332-500 systems (non-RAID

C611M-C (3/06) 698. Power on the NVR300 by pressing the POWER button on the front panel of the unit.The NVR300 boots. During the boot process, the NVR

C611M-C (3/06) 7 Important Safety Instructions Observe the following warnings before installing and using this product:1. Read these instructions. 2.

70 C611M-C (3/06)3. Open Windows XP Disk Management as follows:a. On the Windows XP desktop, right-click the My Computer icon and then click Manage.Th

C611M-C (3/06) 716. Remove the failed storage drive from the carrier as follows:a. Observe that the drive is held in place by two retention clips on e

72 C611M-C (3/06)TroubleshootingThis section provides information to help you determine the cause of a problem and suggested actions to correct the pr

C611M-C (3/06) 73Table G. NVR300 Troubleshooting Guidelines (Continued)Problem Possible Cause Suggested Corrective ActionVideo loss condition—an X ov

74 C611M-C (3/06)ERROR MESSAGESTable H provides a list of NVR300 error messages.Table H. NVR300 Error MessagesError Message Possible Cause Suggested

C611M-C (3/06) 75SpecificationsELECTRICAL/ VIDEOInput Voltage 100-240 VAC +10%, 50/60 Hz, autoranging; reset feature enabled when power becomes unstabl

76 C611M-C (3/06)Appendix. Automatic Data Replenishment (ADR)This appendix provides an overview of the Automatic Data Replenishment technology used by

C611M-C (3/06) 77LOCAL STORAGE ADR can only copy video that exists on the CompactFlash storage device (card or IBM Microdrive™). Pelco recommends sett

78 C611M-C (3/06)Regulatory NoticesThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material orworkmanshi

8 C611M-C (3/06) Product Overview This section provides an overview of the NVR300 network video recorder, software version 3.00. The following inform

United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle EastWorldwide Headquarte

C611M-C (3/06) 9 SAMPLE APPLICATION Figure 1 illustrates a sample scenario of an NVR300 application Integration of the NVR300 user interface with the